DECORDYN 350

DECORDYN 350 is a transparent and liquid anticorrosion product when being processed, which, after the evaporation of the solvent, forms an adhesive protective film. This film also has good lubrication properties and does not have to be removed before the parts are used. DECORDYN 350 can also be applied by an electrostatic spraying process.
A salt spray test was performed with coating thicknesses of 18, 35 and 50 µm. The test was aborted after 672 h. Corrosion could not be determined on any of the test sheets with a coating thickness of >35 µm.

DECORDYN 350 is used for the storage of machine parts, plastics injection moulds, casting moulds, punching, stamping, bending and drawing tools which have to be stored temporarily but must be ready for use all the time.
For bright machine parts and devices e.g. sliding guides, guide rails, clamping and alignment surfaces, which have to be reliably protected against corrosion before shipment. For intermediate storage of valuable semifinished parts in a corrosive environment.
Subject to the number of applications, the treated parts can be stored between 6 and >36 months.

DECORDYN 350 can be applied by spraying conventionally or electrostatically, immersion or with a brush onto dry surfaces. In case of extremely strong corrosive influences it is recommended to increase the thickness of the protective film by repeated applications onto each dry film. During application be sure to have good ventilation.
Application from a spray can is possible without any problems, as DECORDYN 350 Spray, product code: 6691.