kemitura.com

Fumed Silica

admin — Thu, 11 Aug 2011 07:42:37 +0000

Klik på billedet for at gå til KemituraSil

Needlemat – Filomat

admin — Thu, 22 Sep 2011 10:42:02 +0000

High temp. Insulation blankets up to 1260°C

FILOMAT GLASS NEEDLE MAT UP TO 550°C NEEDLE MAT 6 MM NEEDLE MAT 12 MM NEEDLE MAT 25 MM

Silikonvæv

admin — Thu, 22 Sep 2011 11:09:14 +0000

Artikel nr.	Farve	Bredde (cm)	Vægt (g)	Silikone	Tykkelse (mm)	Temperatur resistens (°C)
3200-1-RSS	Grå	100, 127	415g	+ 80g	0,40mm	-36 til +260°C
3200-2-SS	Grå	100, 127	415g	+ 140g	0,40mm	-36 til +260°C
3200-2-RSS	Grå	127	415g	+ 140g	0,40mm	-36 til +260°C
3300-1-RSS	Grå	100, 127	415g	+ 120g	0,40mm	-36 til +260°C
3150-2-SS	Grå	127	415g	+ 50g	0,40mm	-36 til +260°C
3150-2-SS	Grå	150	415g	+ 100g	0,40mm	-36 til +260°C
3200-2-GSR	Rød	127	415g	+ 320g	0,52mm	-36 til +260°C
3259-2-SS	Sølv	152	430g	+ 146g	0,45mm	-36 til +260°C
3200-2-SR	Rød	127	415g	+ 260g	0,40mm	-36 til +260°C
3101-2-SW/75	Hvid	180	415g	+ 70g	0,40mm	-36 til +260°C
8451-2-SW	Hvid	152	860g	+ 200g	0,90mm	-36 til +260°C
3784-2-RSS	Grå	152	860g	+ 300g	0,90mm	-50 til +260°C
3200/FI741-2-SBB	Sort	100	415g	+ 90g	0,40mm	-36 til +260°C
3200-1-SW	Hvid	206	415g	+ 80g	0,40mm	-36 til +260°C
3200-2-SW	Hvid	127	415g	+ 140g	0,40mm	-36 til +260°C

High Temperature insulation 400° C

admin — Thu, 22 Sep 2011 12:36:51 +0000

Select --->	400°C	1000°C	1260°C	<1600°C	>1600°C	Accessories

PRODUCT	DESCRIPTION
DURASTEEL® 400°C DURASTEEL 400 C PDF	DURASTEEL® is a composite insulating board made of a calcium silicate core reinforced on both sides by galvanised or stainless steel covering shells (perforated). The punched lugs produced by the special punching processes are pressed under pressure into the core board, creating the high mechanical strength of DURASTEEL® after the drying process has finished.
PROMAFOUR® 400 400°C PROMAFOUR 400 C PDF	PROMAFOUR®-400-insulating boards are produced with a special cement technology and calcium silicate based.
PROMATHERM® VE250-VE400°C 400°C PROMATHERM 400 C PDF	PROMATHERM®-composite element is a large-sized building element with extraordinary good insulating properties. It consists of two PROMATECT®-H top boards, which are bonded with a temperature resistant mineral wool core. The elements are used as prefabricated parts for wall and ceiling elements, partition walls or flue gas ducts in dryers, industrial furnaces and plant construction.

High Temperature insulation 1000° C

admin — Thu, 22 Sep 2011 13:16:28 +0000

Select --->	400°C	1000°C	1260°C	<1600°C	>1600°C	Accessories

PRODUCT	DESCRIPTION
DALFRATEX® 1000°C DALFRATEX 1000 C PDF	Dalfratex® is a range of inorganic fibres and textiles manufactured by Promat. The textiles are capable of operating continuously at 1000°C and up to 1600°C for limited periods. They have a high resistance to thermal shock. Dalfratex® textiles also provide flexible electrical insulation at temperatures as high as 1000°C.
DURATEC® 750-1000 1000°C DURATEC 1000 C PDF	Duratec® 1000 Machinable Engineering material with good thermal stability and electrical insulation properties. Duratec® 750 Improved product with higher strength, improved electrical performance, and arc resistance.
DURATEC® XP 1000°C DURATEC XP 1000 C PDF	New high strength engineering insulation material. DURATEC-XP® is a new advanced composite in glass fibre technology, with the following characteristics: - Toughness giving near ‘plastic’ performance - Strength at elevated temperature - Non-brittle/flexible behaviour - Electrically inert
MONALITE® M1-M1A 1000°C MONALITE 1000 C PDF	Monalite®-materials from Promat are “technical ceramics” made from calcium silicate. They are formulated without the use of asbestos fibres and are thermally insulating, non-wetting, fracture tough materials with low shrinkage. Monalite® is the standard product for use in aluminium casting and is also used in the furnace industry and other process industries.
MONOLUX® 500-800 800°C MONOLUX 800 C PDF	Monolux® 500 and 800 are low thermal conductivity rigid insulation materials. Monolux® 800 has higher strength for more arduous conditions. Both materials are formulated without asbestos or other inorganic fibres, and are easily machined to close tolerances. With low shrinkage and high strength, the materials provide effective and stable insulation solutions for industrial problems.
PROMABLOCK® 900°C PROMABLOCK 900 C PDF	The PROMABLOCK® 900 board is a compressed, self-supporting board made of alcaline earth silicate fibres, mineral wool and perlite with added organic binder. This board is used as front and as rear lining. It is characterised by low bulk densities, good thermal insulating and corresponding stability.
PROMAFLEX® 1000°C PROMAFLEX 1000 C PDF	PROMAFLEX® is a heat-resistant fabric based on at least 95% SiO2. It is available in various types, e.g. cloths, tapes, sleeves, ropes, blaidings, etc. The PROMAFLEX®- yarn is texturised by air wich gives the PROMAFLEX® -fabrics a good thermal insulation.
PROMAGLAF® textiles 500°C PROMAGLAF 500 C PDF	PROMAGLAF® textiles are produced with mineral E-glass fibres (DIN 61850, ISO 6355).
PROMALAN® HT100-200 750°C PROMALAN 750 C PDF	PROMALAN® HT 100 to 200 are high temperature resistant mineral wool boards with bulk densities of 100 to 200 kg/m3. The raw material (volcanic stone diabas) fulfils the highest quality demands, especially high permanent temperature resistance. Even fibre structure, good homogeneity and low organic binder content provide the basis for excellent behaviour at high temperatures and low thermal conductivity.
PROMALIGHT® 240 1000°C PROMALIGHT 240 - 1000 C PDF	PROMALIGHT® -240 is a microporous thermal insulation board, made as a slab in a skin of glass cloth with very good thermal and mechanical properties. PROMALIGHT®-240 FX is the same board sewn through using special thread to become a flexible board.
PROMALIGHT® 320/320HD/ 320FPA/330 1000°C PROMALIGHT 320-320HD-320FPA-330 - 1000 C PDF	PROMALIGHT® is a microporous insulation board of mainly pyrogenic silica. PROMALIGHT® has extreme thermal insulation properties thanks to their fine microporous structure.
PROMASSAL® 500°C PROMASSAL 500 C PDF	PROMASSAL® is a dense calcium silicate board, thermally and electrically insulating. It has a very good bending and compressive strength and can be used in all industrial applications.
PROMATECT® -L 500°C PROMATECT 500 C PDF	PROMATECT®-L is a lightweight largesized board based on calcium silicate with good insulating efficiency up to 500°C. The homogeneous, stable, calcium silicate based structure provides favourable technical properties

High temperature insulation

admin — Thu, 22 Sep 2011 13:53:53 +0000

Select --->	400°C	1000°C	1260°C	<1600°C	>1600°C	Accessories

PRODUCT	DESCRIPTION
ALSIFLEX® Board and paper 1260°C - 1400°C ALSIFLEX 1260 C PDF	ALSIFLEX® is a refractory ceramic fibre based on aluminium and silicium oxide. ALSIFLEX® boards and paper are lightweight, flexible insulating materials based on ceramic fibres, with high permanent temperature resistance, low thermal conductivity and partly high chemical resistance.
MICATECH® 1100 1050°C MICATECH 1100 - 1050 C PDF	MICATECH® offers tailored solutions to many applications in the form of precision complex shapes and boards based on Vermiculite. MICATECH® components are available in a range of densities and high integrity binders selected to suit the chosen application. They are non-irritant, odourless and clean to handle.
NEFALIT® 1100-1200 1200°C NEFALIT 1100-1200 - 1200 C PDF	NEFALIT ®-boards are rigid insulating materials based on mineral wool, woolastonite and calcium silicate fibres with mineral filling components. The boards are bound with both organic and inorganic binders. Due to this combination, the boards have high temperature resistance, low thermal conductivity and good electrical insulating properties. This material is asbestos-free and with its all-round properties it replaces previously used asbestos boards. The areas of application are numerous and not limited to the main application field of high temperature seals
PROMACLAD® 1100 1050°C PROMACLAD 1100 - 1050 C PDF	High temperature insulating board on the basis of exfoliated vermiculite and inorganic binders. The material is free of asbestos and organic substances. Vermiculite is an aluminium-magnesium silicate, which bloats to ultra lightweight granulates through heating and is processed to boards, bricks and shaped parts through a compression mould procedure.
PROMAGLAF® HTK Blankets and bulk 1260°C PROMAGLAF HTK Blankets and bulk - 1260 C PDF	PROMAGLAF® HTK are earth-alkali silicate fibres (high temperature glass fibres) and do not belong to the group of ceramic fibres. PROMAGLAF® HTK has reduced biological resistance and is not subject to any classification.
PROMAGLAF® HTI 1260°C PROMAGLAF HTI - 1260 C PDF	PROMAGLAF® HTI are earth-alkali silicate fibres (high temperature glass fibres) and do not belong to the group of ceramic fibres. PROMAGLAF® HTI has reduced biological resistance and is not subject to any classification.
PROMAGLAF® HTK textiles 1260°C PROMAGLAF HTK textiles - 1260 C PDF	PROMAGLAF® HTK Textiles are textile products based on earth-alkali silicate fibres (high temperature glass fibres) reinforced with chrome nickel wire. Due to the fact that all PROMAGLAF® HTK textile products are manufactured, with body soluble fibres, PROMAGLAF® HTK is not classified under directive 97/69/EC. Therefore labelling and special precautions during processing and packaging are not required.
PROMASIL® 1000-1200 1100°C PROMASIL 1000-1200 - 1100 C PDF	Promasil® 1000-1100 are lightweight calcium silicate insulating boards, asbestos-free. In combination with lightweight refractory bricks or refractory concrete, they are the ideal construction material for rear linings.

High Temperature insulation 1260 C

admin — Thu, 22 Sep 2011 14:49:16 +0000

Select --->	400°C	1000°C	1260°C	<1600°C	>1600°C	Accessories

PRODUCT	DESCRIPTION
ALSIFLEX® Board and paper 1260°C - 1400°C ALSIFLEX 1260 C PDF	ALSIFLEX® is a refractory ceramic fibre based on aluminium and silicium oxide. ALSIFLEX® boards and paper are lightweight, flexible insulating materials based on ceramic fibres, with high permanent temperature resistance, low thermal conductivity and partly high chemical resistance.
MICATECH® 1100 1050°C MICATECH 1100 - 1050 C PDF	MICATECH® offers tailored solutions to many applications in the form of precision complex shapes and boards based on Vermiculite. MICATECH® components are available in a range of densities and high integrity binders selected to suit the chosen application. They are non-irritant, odourless and clean to handle.
NEFALIT® 1100-1200 1200°C NEFALIT 1100-1200 - 1200 C PDF	NEFALIT ®-boards are rigid insulating materials based on mineral wool, woolastonite and calcium silicate fibres with mineral filling components. The boards are bound with both organic and inorganic binders. Due to this combination, the boards have high temperature resistance, low thermal conductivity and good electrical insulating properties. This material is asbestos-free and with its all-round properties it replaces previously used asbestos boards. The areas of application are numerous and not limited to the main application field of high temperature seals
PROMACLAD® 1100 1050°C PROMACLAD 1100 - 1050 C PDF	High temperature insulating board on the basis of exfoliated vermiculite and inorganic binders. The material is free of asbestos and organic substances. Vermiculite is an aluminium-magnesium silicate, which bloats to ultra lightweight granulates through heating and is processed to boards, bricks and shaped parts through a compression mould procedure.
PROMAGLAF® HTK Blankets and bulk 1260°C PROMAGLAF HTK Blankets and bulk - 1260 C PDF	PROMAGLAF® HTK are earth-alkali silicate fibres (high temperature glass fibres) and do not belong to the group of ceramic fibres. PROMAGLAF® HTK has reduced biological resistance and is not subject to any classification.
PROMAGLAF® HTI 1260°C PROMAGLAF HTI - 1260 C PDF	PROMAGLAF® HTI are earth-alkali silicate fibres (high temperature glass fibres) and do not belong to the group of ceramic fibres. PROMAGLAF® HTI has reduced biological resistance and is not subject to any classification.
PROMAGLAF® HTK textiles 1260°C PROMAGLAF HTK textiles - 1260 C PDF	PROMAGLAF® HTK Textiles are textile products based on earth-alkali silicate fibres (high temperature glass fibres) reinforced with chrome nickel wire. Due to the fact that all PROMAGLAF® HTK textile products are manufactured, with body soluble fibres, PROMAGLAF® HTK is not classified under directive 97/69/EC. Therefore labelling and special precautions during processing and packaging are not required.
PROMASIL® 1000-1200 1100°C PROMASIL 1000-1200 - 1100 C PDF	Promasil® 1000-1100 are lightweight calcium silicate insulating boards, asbestos-free. In combination with lightweight refractory bricks or refractory concrete, they are the ideal construction material for rear linings.

High Temperature insulation 1600 C

admin — Thu, 22 Sep 2011 15:04:09 +0000

Select --->	400°C	1000°C	1260°C	<1600°C	>1600°C	Accessories

PRODUCT	DESCRIPTION
ALSIFLEX® Blankets and bulk 1430°C ALSIFLEX - Blankets and bulk - 1600 C PDF	ALSIFLEX® is a refractory ceramic fibre based on aluminium and silicium oxide. ALSIFLEX® blankets and bulk are lightweight, flexible insulating materials with high permanent temperature resistance, low thermal conductivity and partly high chemical resistance.
ALSIFLEX® textiles 1260°C ALSIFLEX - Textiles - 1260 C PDF	ALSIFLEX® Textiles are textile products based on ALSIFLEX® ceramic fibres reinforced with glassfibre or chrome-nickel-wire.
ALSIFLEX® ALCEN 1600°C ALSIFLEX ALCEN - 1600 C PDF	ALSIFLEX® ALCEN 1600°C is a polycrystalline alluminium fiber based on mulite and corund.
PROMAFORM® PROMAFELT 1600°C PROMAFORM PROMAFELT - 1600 C PDF	PROMAFORM® are lightweight, rigid vacuum-formed ceramic fibre shaped parts and boards based on aluminium silicate fibres. PROMAFELT® are soft vacuum-formed ceramic fibre boards based on aluminium silicate fibres.

High Temperature insulation >1600 C

admin — Fri, 23 Sep 2011 09:21:04 +0000

Select --->	400°C	1000°C	1260°C	<1600°C	>1600°C	Accessories

PRODUCT	DESCRIPTION
PROMATON® Insulatinng bricks 1650°C PROMATON Insulatinng bricks - 1650 C PDF	PROMATON® lightweight refractory bricks are the result of long years of development and application technology. A combination of experience, high-quality raw materials and economical production techniques makes this material suitable for use in high performance, lightweight constructions in modern industrial and furnace plants.
PROMATON® 23-26-28 1260°C 1430°C 1540°C PROMATON 23-26-28 - 1540 C PDF	PROMATON® - lightweight refractory bricks are made from high purity refractory raw materials and are fired in modern furnaces according to a casting and extrusion process using a carefully graded organic filler which is burned out during manufacture to give a uniform controlled pore structure. The production is ISO 9001 quality assured.

Silicone rubber

admin — Fri, 23 Sep 2011 11:52:46 +0000

Silikone Gummi

Product:		RTV-200	RTV-831	RTV-835	RTV-847	RTV-863	RTV-228
Color		Translucent	White	Dark Red	White	White	Reddish brown
Ration	by weight	100:05	100:05	100:05	100:05	100:05	100:100
Mix. Visc.	(*CpS)mPa.s	1,3 mio.	50.000	20.000	30.000	45.000	(7500)*
Pot life	min.	90	60	60	60	60	15-20
Gel time	min.	45	30	30	30	30	15
Demould time	Hours	12-18	24	24	24	24	2
Type of curing*		Condensation	Condensation	Condensation	Condensation	Condensation	Addition
Density Mixed	g/cm³	1,1	1,12	1,5	1,12	1,12	1,1
Shore A		23	8	55	17	25	28
Linear shrinkage	%	0,8	0,8	0,5	0,8	0,8	0,1
Tensile strength	Mpa	3	3	3	3	4,0	7,5
Elongation	%	500	600	65	600	500	450
Tear strength	N/mm	18	18	13	17	21	20
Shrinkage 40°C	%
Shrinkage 60°C	%
Expansion 40°C	%
Temp. Resistans	°C	-50-+120	-50-+120	-50-+350	-50-+120	-50-+120	-70-+200
Pack size		22 kg A + 1,1 kg Cat.	25 kg A + 1,25 kg Cat	25 kg A + 1,25 kg Cat	25 kg A + 1,25 kg Cat	25 kg A + 1,25 kg Cat	25 kg A + 25 kg B
Shelf life		3-6 months	1 year	1 year	1 year	1 year	1 year
Remarks/ Application		Thixotropic rubber	Electronic	Metal casting	Allround	High Strength	Tampon

Product:		RTV-233	RTV-250	RTV-256	RTV-896	RTV-899
Color		Translucent	Transparent	Transparent	White/red/trans.	Dark Grey
Ration	by weight	100:100	100:10:00	100:10:00	100:10:00	100:10:00
Mix. Visc.	(*CpS)mPa.s	(7500)*	50.000	50.000	25.000	45.000
Pot life	min.	20	90	90	60	60
Gel time	min.	15	50	45	30	30
Demould time	Hours	3	20	20	16-24	16-24
Type of curing*		Addition	Addition	Addition	Addition	Addition
Density Mixed	g/cm³	1,1	1,1	1,08	1,1	1,3
Shore A		33-35	40	34	28	50
Linear shrinkage	%	0,1	0,1	0,1	0,1	0,1
Tensile strength	Mpa	5,7	6,5	5,5	7,5	5
Elongation	%	430	400	380	450	300
Tear strength	N/mm	18	18	14	20	8
Shrinkage 40°C	%
Shrinkage 60°C	%
Expansion 40°C	%
Temp. Resistans	°C	-70-+200	-70-+280	-50-+220	-70-+220	-70-+220
Pack size		20 kg A+ 20 kg B	20 kg A+ 2 kg B	20 kg of A + 2 kg B	25 kg A + 2,5 kg B	25 kg A+ 2,5 kg B
Shelf life		1 year	1 year	1 year	1 year	1 year
Remarks/ Application		Rapid Prototyping	Rapid Prototyping	As RTV-250 but with extra release	High strength	Ceramics moulds

Oils
Oils – PDF

Emulsion
Emulsion – PDF

Sealant (Fugemasse)
Sealant – PDF

Antifoams
Antifoams – PDF