GLEITMO 602
Dry solid film lubricant for mass part coating
Description
gleitmo 602 is a suspension of high-molecular polymers in water. gleitmo 602 is used as coating agent and develops a well adhering, touch-proof lubricating film after drying. gleitmo 602 has been developed to achieve defined friction properties in a minimum variation range.
Fields of application
gleitmo 602 has been especially developed for mass-part coating.
A typical application example is the coating of screws/bolts and nuts where a higher friction coefficient range of µ = 0.10 - 0.18 is required.
Method of application
Subject to the requirements, gleitmo 602 can be diluted in water (at least of drinking water quality). As a rule, gleitmo 602 is used in coating baths at dilution ratios of 1 : 3 (for centrifuges) up to 1 : 7 (for dipping). The parts to be coated must be free of grease. The drums and centrifuges commonly used in the galvanising industry have proved to be very convenient in case of large coating quantities. After the coating process it is recommended to dry the parts by hot air (up to a part temperature of approx. 70 °C). Additional information regarding coating and bath maintenance is included in our Technical Information for gleitmo 602.
Note
Protect against freezing! In closed original containers at room temperature storable up to 24 months.
Features
- temperature range for the dry solid film lubricant: -40 / +80 °C
- provides a touch-proof and abrasion-resistant clear lubricating film
- suitable for mass parts
- saves assembly time and is especially suitable for automatic bolting systems
- is clean and non-greasing
- sticks well on a lot of material surfaces
- environmentally and user friendly
- contains a UV additive for a UV coating inspection (340 – 380 nm)