GLEITMO 605
Dry solid film lubricant to coat small bulk parts
Description
gleitmo 605 is a suspension of high-molecular polymers in water.
gleitmo 605 has been designed to achieve defined friction coefficients on screws/bolts according to the specifications of the automotive industry (VDA).
Fields of application
gleitmo 605 is primarily used for the lubrication of connecting elements like nuts, metric screws/bolts, chipboard screws, sheet metal screws, clamping screws, cap nuts for cutting ring joints, etc.
Method of application
Depending on the requirements, gleitmo 605 can be diluted with water (at least of drinking water quality). As a rule, gleitmo 605 is used at dilution ratios of 1 : 3 (for centrifuge coating procedures, stringent requirements) up to 1 : 7 (for dipping). In this process, water is added to gleitmo 605 while constantly stirring.
The parts to be coated must be free of grease. Drums and centrifuges commonly used in the galvanizing industry have proved to be very convenient.
After the coating process it is recommended to dry the parts by hot air (up to a part temperature of approx. 80 °C). Packaging of coated parts only in absolutely dry condition.
For additional notes regarding coating and bath maintenance please refer to the Technical Information on gleitmo 605.
Note
Protect against freezing!
In closed original containers at room temperature storable up to 24 months.
Features
- is clean and non-greasing
- provides an absolutely touch-proof, clear-glossy lubrication film
- is environmentally and user friendly
- will not affect the efficiency of screw locking systems
- has a very good surface adhesion on a large number of materials
- saves assembly time and is particularly suitable for automatic screw-driving systems
- is suitable for small bulk parts
- meets the requirements of the automotive industry (VDA) for screw lubrication
- temperature range: -40 / +110 °C
- contains a UV additive for a UV coating inspection (340-380 nm)