GLEITMO 627
Dry solid film lubricant for mass part coating
Description
gleitmo 627 is a suspension of high-molecular polymers in water. To optimize the lubrication properties gleitmo 627 contains a specially selected PTFE.
gleitmo 627 is used as a coating agent and develops a well adhering, touch-proof lubricating film after drying.
gleitmo 627 has been developed to achieve defined low friction coefficients with a minimum variation range.
Fields of application
gleitmo 627 is used for mass part lubrication.
A typical application example is the coating of stainless-steel screws/bolts and nuts, self-tapping or self-forming screws, rivets, sheet-metal screws, and chipboard screws.
Method of application
Depending on the requirements, gleitmo 627 can be diluted in water (at least drinking water quality). As a rule, gleitmo 627 is used at dilution ratios of 1 : 3 (for centrifuge coating processes; stringent requirements) up to app. 1 : 7 (for dipping). In individual cases dilution ratios of 1 : 1 to 1 : 2 are used to achieve minimum grooving torques.
The parts to be coated must be free of grease. Drums and centrifuges commonly used in the galvanising industry have proved to be convenient in case of large coating quantities.
After the coating process it is recommended to dry the parts by hot air (up to a part temperature of approximately 80 °C).
Note
Protect against freezing!
In closed original containers, at room temperature, storable up to 24 months.
Features
- to achieve low friction coefficients/grooving torques for bolted connections, with a low variation
- saves assembly time and is particularly suited for automatic systems
- is clean and non-greasing
- contains a UV additive for a UV coating inspection (340 – 380 nm)
- temperature range of the dry lubricating film: -40 / +110 °C
- to avoid seizures of stainless-steel connections
- provides a transparent, touch-proof and abrasion-resistant lubricating film
- is suitable for mass parts
- sticks well on a lot of material surfaces