Address:

Industrivej 9 – DK-3540 Lynge

Phone:

+45 47 17 18 55

Email:

Opening Hours:

Mon-Thu 8:30 - 16:30 & Fri 8:30 - 16:00

GLEITMO SFL 9025

GLEITMO SFL 9025




Water-based MoS2 solid film lubricant

Description

gleitmo SFL 9025 is a water-based solid film lubricant. Its active lubricating component is a synergistically acting combination of solid lubricants with a predominant portion of molybdenum disulphide.

Fields of application

For the coating of screws or nuts in order to avoid fretting (stainless steel) in order to achieve definite assembly and disassembly.
gleitmo SFL 9025 is suitable for dry lubrication of slide rails, joints and bolts and for running-in lubrication of high loaded parts.

Method of application

gleitmo SFL 9025 is applied via compressed air and airless spraying systems. Dipping or centrifuging is convenient for small parts. Brush or roller is recommended only in case spraying or immersion is infeasible.
The sliding surfaces to be coated should be carefully degreased with a solvent or water based cleaners and should be dry before applying. Phosphating or sandblasting pre-treatment is recommended to increase the adhesion of the coating on metal parts.

Note

Stir well before use!
Protect from freezing.
Shelf life: 12 month in closed original container at room temperature

Features

  • temperature range: -180 / +250 °C
  • resistant to mineral oil and synthetic fluids
  • forms a dry, firmly adhering lubricating film
  • produces a low, constant friction
  • facilitates assembly
  • resistant to high loads
  • prevents from seizure of materials with a tendency towards cold welding
  • prevents from stick-slip friction