GLEITMO SFL 9085
Water-based PTFE solid film lubricant
Description
gleitmo SFL 9085 is an air-drying water-based solid film lubricant with an organic binder. It contains a specially processed polytetrafluorethylene as an active ingredient with high lubrication and separating effects.
gleitmo SFL 9085 adheres very well on many materials.
Fields of application
For dry lubrication of a wide variety of material pairings, such as metal, plastics, rubber and ceramics either with or among each other.
For lubrication, wear protection and to avoid noise occurance in automobile interieur.
geitmo SFL 9085 can be used for the coating of screws, nuts, bolts, fittings and rubber seals to enable defined assembly.
Method of application
gleitmo SFL 9085 may be applied with compressed air and airless spraying systems. Agitators are recommended for the container in this case.
Immersion is economical for large quantities of small parts. Owing to uneven coating, application with a brush or roller is only recommendable if spraying or immersion is not possible.
The sliding surfaces to be coated should be carefully degreased with a solvent and allowed to dry.
Note
Stir well before use!
Protect from freezing!
Shelf-life: 12 month in the closed
Original containers at room
temperature
Features
- temperature range: -180 / +250 °C
- forms a dry, thin lubricating film
- adheres very well on many material surfaces
- offers exceptional non-stick and separating characteristics
- does not soil or grease
- facilitates assembly of parts with robots (sealing rings, screws)
- is environmentally harmless and user friendly
- is containing an UV-illumination additive for coating control by means of UV-light (340 – 380 nm)