LUBRODAL C 100 SF

LUBRODAL C 100 SF is a stable emulsion concentrate which can be sprayed on to lubricate moulds in pressure die casting of aluminium, magnesium and other non-ferrous metals.
LUBRODAL C 100 SF contains special additives which provide a high degree of thermal stability. It is easy to spread in a thin layer over the die casting mould.
LUBRODAL C 100 SF does not form any protruding substances or residues in or next to the moulds. The ventilation slots are not clogged.
The casting surfaces are clean and light and can be surface-treated after careful cleaning of residues.

LUBRODAL C 100 SF is supplied in concentrate form and must be diluted with water prior to using.
The mixture ratio depends on the specific casting and spraying parameters and especially on die temperature and complexity of the casting.
Recommended ratio for Aluminium  1:80 to 1:120
Recommended ratio for Magnesium  1:60 to 1:80
The optimal rate of dilution has to be determined in practice.

LUBRODAL C 100 SF can be applied using hand spray guns, static and automatic spraying equipment.
To achieve an effective, even coverage, use a spray with an adjustable nozzle and adjust the air-liquid ratio.
We recommend that the spraying equipment be cleaned at regular intervals (once a week) by flushing through with water. The equipment should be cleaned in this way if it is going to stand idle for any period of time.