Address:

Industrivej 9 – DK-3540 Lynge

Phone:

+45 47 17 18 55

Email:

Opening Hours:

Mon-Thu 8:30 - 16:30 & Fri 8:30 - 16:00

LUBRODAL FC 331

LUBRODAL FC 331




Water miscible lubricant which contains graphite

Description

LUBRODAL FC 331 is a fine particle colloidal dispersion of graphite in water.
LUBRODAL FC 331 meets all the requirements of a water-miscible lubricant for use in the forging and release procedures involved in warm, and semi-hot forging steel.
LUBRODAL FC 331 creates a closed, highly adhesive film of graphite, which can withstand high temperatures even when applied onto preheated metal surfaces.
LUBRODAL FC 331 is preferentially used as a billet precoat for semi-hot forging (700 - 800 °C).

Method of application

LUBRODAL FC 331 is supplied as a concentrate which must be diluted with water before use.
LUBRODAL FC 331 can be diluted as required. We recommend that a mechanical stirrer is used. To prevent settling out, the working liquids should be kept in motion, either by stirring or pumping.

Guidelines for dilution (graphite precoating):

→ 1...3 parts water, 1 part LUBRODAL FC 331

Features

  • graphite precoat for semi-hot forging
  • can be applied either by spraying or dipping
  • excellent wetting properties, even at high temperatures
  • graphite film adheres well and is thermally stable
  • prevents scale during and after inductive heating (700 - 800 °C)
  • produces little smoke
  • stable against oxidation