MOLY-PAUL 959
Release agent for casting molds
Description
MOLY-PAUL 959 is a cream-colored liquid emulsion forming well wetting, non-hardening and non-drip films on casting molds for the production of pre-cast ceramic parts. MOLY-PAUL 959 is non-staining after the drying and heat-curing processes. The emulsion is not critical to use and easily biodegradable.
Fields of application
MOLY-PAUL 959 is a versatile product designed for the use as a mold release agent on wooden, laminate, plastic, metal and composite-material molds. It can be used in combination with any conventional refractory material, binding agent and filler.
Method of application
Prior to its application, MOLY-PAUL 959 should be stirred until a homegenous mixture is obtained. After long storage periods the use of an electric stirrer may be advisable. In case of a daily use manual stirring is sufficient. MOLY-PAUL 959 can be applied using automatic spraying systems, compressed-air and paraffin-type spray guns, paint brushes and rollers, sponges, or rags. Consumption will vary subject to the properties of the substrate between 50 and 80g/m²
Note
Protect from frost ! Storage temperature: 5-30°C
Features
- high release effect
- good wetting of the substrate materials
- no staining
- no dripping
- easily biodegradable as per OECD 301 D