Address:

Industrivej 9 – DK-3540 Lynge

Phone:

+45 47 17 18 55

Email:

Opening Hours:

Mon-Thu 8:30 - 16:30 & Fri 8:30 - 16:00

POWDER MoS2 S SPRAY

POWDER MoS2 S SPRAY




Molybdenum disulphide powder-Spray

Description

POWDER MoS2 S SPRAY is a pure molybdenum disulphide powder made from natural molybdenite. The manufacturing process guarantees that the natural structure is maintained.

Fields of application

POWDER MoS2 S SPRAY is used for cold forming and dry lubrication, if lubrication with oils or greases is not possible. For economic application on small mass parts.

Method of application

Degrease and clean parts which have to be coated with solvent. Afterwards apply POWDER MoS2 S SPRAY uniformly onto the surfaces. POWDER MoS2 S SPRAY is also available in standard packaging, product code: 0217. This allows to rub the powder onto the surface using a leather rag. Small mass parts are coated in a tumbling process after being phosphated.

Features

  • low friction at high loads
  • non-conductive
  • free of abrasive components
  • chemically resistant
  • allows an economical application on mass parts
  • increases friction properties of compressed materials
  • temperature range: -180 / + 350 °C (air) -180 / + 700 °C (hydrogen atmosphere) -180 / + 1100 °C (vacuum) -180 / + 1300 °C (inert gas)
  • good adhesion due to a high affinity for metals
  • wide temperature range
  • non-magnetic