Address:

Industrivej 9 – DK-3540 Lynge

Phone:

+45 47 17 18 55

Email:

Opening Hours:

Mon-Thu 8:30 - 16:30 & Fri 8:30 - 16:00

SOK AQUA G PLUS

SOK AQUA G PLUS




Concrete release agent emulsion for use in the production of large-diameter pipes, manholes, paving stones, etc.

Description

SOK AQUA G PLUS is an aqueous concrete release agent emulsion. SOK AQUA G PLUS is solvent free. SOK AQUA G PLUS is very suitable for use with standard concrete and easy compacting concrete (ECC).

Fields of application

SOK AQUA G PLUS is suitable for the use on steelmould, plastic-coated and planed wooden shuttering.

Method of application

SOK AQUA G PLUS is applied thinly and uniformly onto the clean and dry shuttering using suitable spraying equipment (with Teejet nozzle SS 730039, SS 800050 or SS 800067). Drop formation and overdosing are to be avoided. Consumption amounts to approximately 1 litre for 60 to 130 m² according to the type of shuttering.
SOK AQUA G PLUS may not be mixed with release agents, water, oils or solvents. It is ready for use!

Note

The container must be protected from frost and direct solar radiation. The container is to be well sealed after each withdrawal.

The product is to be used within 6 months of production (for production date see bar code label).

Please observe water resources policy act and EU safety data sheet!

The product may not come in contact with zinc or galvanised materials.

The biological degradability of > 80% is related to the oil phase (modified storm test, easily biodegradable).

Store cleaning rags wetted with SOK AQUA G PLUS in a closed and approved container.