SOK AQUA M
Concrete release agent emulsion for use in precast plants - easy to reapply
Description
SOK AQUA M is an aqueous concrete release agent emulsion preferably for the application in precast plants.
Fields of application
SOK AQUA M is suitable for steel-coated-, plastic-coated- and planed wooden shuttering.
Method of application
SOK AQUA M is applied thinly and uniformly onto the clean and dry shuttering using suitable spraying equipment (with Teejet nozzle SS 730039, SS 800050 or SS 800067). Drop formation and overdosing are to be avoided. Consumption amounts to approximately 1 litre for 60 to 100 m² subject to the type of shuttering.
SOK AQUA M may not be mixed with release agents, water, oils or solvents. It is ready for use!
SOK AQUA M may not be mixed with release agents, water, oils or solvents. It is ready for use!
Note
The container must be protected from frost and direct solar radiation. The container is to be well sealed after each withdrawal.
The product is to be used within 6 months of production.
Please observe water resources policy act and EU safety data sheet!
The product may not come in contact with zinc or galvanised materials.
Store cleaning rags wetted with SOK AQUA M in a closed and approved container.
Features
- largely prevents pore formation
- ensures the production of clean and uniform surfaces
- does not impair the adhesion of plaster, adhesives and painting work
- operating temperature up to 70 °C (shuttering temperature)
- easy to re-apply without streaking
- contains effective corrosion protection for steel shuttering
- SOK AQUA M does not attack Styropor®
- suitable for use on vertical surfaces
- good biodegradability