Address:

Industrivej 9 – DK-3540 Lynge

Phone:

+45 47 17 18 55

Email:

Opening Hours:

Mon-Thu 8:30 - 16:30 & Fri 8:30 - 16:00

SOK U/K 115

SOK U/K 115




Concrete release agent with very high corrosion protection for steel formwork, for use in precast plants

Fields of application

SOK U/K105 is suitable for all shuttering, e.g. rough-sawn and planed wooden shuttering, steel shuttering, film and plastic-coated panels, polysulphide matrixes and ABS foil-coated systems.

Method of application

SOK U/K105 is applied thinly and uniformly onto the clean and dry shuttering using a brush or a suitable spraying device (with Teejet nozzle SS 800067). Consumption: for non-absorbent shuttering 50-100 m²/l, for absorbent shuttering 40-80 m²/l. SOK U/K105 should not be diluted with water, oil or solvent - it is ready to use!

Note

  • Storage temperature not below -5 °C.
  • The duration of storage should not exceed 1 year.
  • Store barrels horizontally.
  • Seal container after use in order to prevent active ingredients escaping at higher temperatures.

Features

  • operating temperature up to 100 °C (shuttering temperature)
  • may be used anywhere
  • suitable for the production of fair-faced concrete
  • largely prevents pore formation
  • ensures the production of clean and uniform surfaces
  • does not impair the adhesion of plaster, adhesives and painting work
  • contains very effective corrosion protection for steel shuttering