SOK ULTRA
Concrete release agent for primary use in precast plants, especially for considerably heated formwork
Description
SOK ULTRA is a concrete parting agent which is suitable for all absorbent and non-absorbent formwork. The aromatic compounds in the contained solvent have been extracted to a great degree which has a positive effect on the formation of odours.
Fields of application
SOK ULTRA is suitable for all formwork, e.g. planed wooden formwork, steel formwork, film- and plastic-lined panels, polysulphide matrixes, and ABS-lined systems. SOK ULTRA is well suited for use in vertical fabrications, such as, for example, on garages, girders and bar sections.
Method of application
A thin and uniform coat of SOK ULTRA is applied with a brush or a suitable spraying device (with T jet nozzle SS 800067) to the clean and dry formwork. Consumption for non-absorbent formwork 50 – 100 m²/l, for absorbent formwork 30 – 60 m²/l. SOK ULTRA may not be diluted with water, oils, or solvents – the delivered concentration is ready for use!
Note
- storage temperature not below -5 °C
- the storage period should not exceed 1 year
- store barrels on their sides
- reseal packaging after removal, e.g. to prevent the active substances from escaping at increased temperatures
Features
- temperature for use up to 130 °C (formwork temperature)
- universal application
- suitable for the casting of exposed concrete
- prevents pore formation to a great extent
- ensures clean and even surfaces
- no impediment to plaster, adhesive, and paint adhesion
- rapidly biodegradable