GLEITMO SFL 9560

gleitmo SFL 9560 is a white, heat-curing solid film lubricant having PTFE as a constituent for lubrication efficiency. The product forms a dry lubricating film, which is distinguished by its excellent lubricating effect, high degree of abrasion resistance and very good corrosion protection. Because of its advanced binder system gleitmo SFL 9560 can already be cured at 130 °C, thus protecting the substrate and enabling energy to be saved. gleitmo SFL 9560 is resistant to mineral oils and many chemicals.

gleitmo SFL 9560 is used for the lifetime lubrication of metallic materials subjected to medium and high pressures or slow sliding speeds as well as emergency lubrication. Examples are the lubrication of adjusting mechanisms (spindles and slide rails) or machine components requiring dry lubrication and good corrosion protection.

Coating is carried out by spraying or using the dipping or centrifugal dipping methods. Before this happens, the parts to be coated must be thoroughly de-greased with a solvent. The surfaces must be dry when the coating is applied. To increase the adhesive strength, and therefore the lifetime, pre-treatment of the surfaces is recommended by phosphatising or sand-blasting. In order to achieve quicker drying and improved adhesion of the coating, pre-heating of the parts to about 80-90 °C before coating has proved to be effective.

Stir well before use!
Shelf-life: 12 month in closed original container at room temperature