SOK 912
Concrete release agent for primary use in precast plants
Description
SOK 912 is a concrete parting agent which is suitable for all absorbent and non-absorbent formwork. The aromatic compounds in the contained solvent have been extracted to a great degree which has a positive effect on the formation of odours. SOK 912 is standardised as “greasier” than its associated product SOK 128, and therefore it hardly contaminates the shuttering with release agent.
Fields of application
SOK 912 is suitable for all formwork, e.g. rough-sawn and planed wooden formwork, steel formwork, film- and plastic-lined panels, polysulphide matrixes, and ABS-lined systems.
Method of application
A thin and uniform coat of SOK 912 is applied with a brush or a suitable spraying device (with T jet nozzle SS 800067) to the clean and dry formwork. Consumption for non-absorbent formwork 50 – 100 m²/l, for absorbent formwork 30 – 60 m²/l. SOK 912 may not be diluted with water, oils, or solvents – the delivered concentration is ready for use!
Note
- storage temperature not below -5 °C
- the storage period should not exceed 1 year
- store barrels on their sides
- reseal packaging after removal, e.g. to prevent the active substances from escaping at increased temperatures
Features
- temperature for use up to 100 °C (formwork temperature)
- universal application
- suitable for the casting of exposed concrete
- prevents pore formation to a great extent
- ensures clean and even surfaces
- no impediment to plaster, adhesive, and paint adhesion
- hyperlink biodegradable