SOK AQUA EXTRA KS
Concrete release agent emulsion, mainly for use in precast plants
Description
SOK AQUA EXTRA KS is an aqueous concrete release agent emulsion. SOK AQUA EXTRA KS is free of solvents.
Fields of application
SOK AQUA EXTRA KS was particularly designed for the use in precast plants.
Method of application
SOK AQUA EXTRA KS is applied thinly and uniformly onto the clean and dry form using suitable spraying equipment (with Teejet nozzle SS 800067 or SS 1100067). The spraying pressure should be kept above 5.0 bar. Attention is to be paid to a very economical application. Drop formation and overdosage are to be avoided. Consumption amounts to approximately 1 litre for 25 to 50 m² according to the type of form. SOK AQUA EXTRA KS may not be mixed with release agents, water, oils or solvents. It is ready for use!
Note
The container must be protected from direct sunlight. The container is to be well sealed after each withdrawal. Protect from frost. The product is to be used within 6 months after produc-tion (production date: see bar code label).
The use of SOK AQUA EXTRA KS is neither subject to the Federal Law on Immission Control (BImSchG = Bundesimmissionsschutzgesetz) nor the VOC Directive.
Please observe water resources policy act and EU safety data sheet!
The product may not come in contact with zinc or galvanised materials.
Features
- operating temperature up to 70 °C (shuttering temperature)
- solvent free
- does not impair the adhesion of plaster, adhesives and paint
- largely prevents pore formation
- ensures the production of clean and uniform surfaces
- rain-resistant after emulsion breaking
- does not attack Styrofoam®
- contains very effective corrosion protection for steel shuttering