SOK AQUA KS
Concrete release agent emulsion with enhanced corrosion portection for steel formwork
Description
SOK AQUA KS is an aqueous concrete release agent emulsion. SOK AQUA KS contains an increased corrosion protection for steel shuttering. The product is very appropriate for the manufacturing of ceilings and walls with steel shuttering.
Fields of application
SOK AQUA KS is suitable for steel-shuttering.
Method of application
SOK AQUA KS is applied thinly and uniformly onto the clean and dry shuttering using suitable spraying equipment (with Teejet nozzle SS 730039, SS 800050 or SS 800067). Drop-formation and overdosing are to be avoided. Consumption amounts to approximately 1 litre for 60 to 130 m² according to the type of shuttering.
SOK AQUA KS may not be mixed with release agents, water, oils or solvents. It is ready for use!
SOK AQUA KS may not be mixed with release agents, water, oils or solvents. It is ready for use!
Note
The container must be protected from frost and direct solar radiation. The container is to be well sealed after each withdrawal.
The product is to be used within 6 months of production.
Please observe water resources policy act and EU safety data sheet!
The product may not come in contact with zinc or galvanised materials.
Store cleaning rags wetted with SOK AQUA KS in a closed and approved container.
Features
- largely prevents pore formation
- ensures the production of clean and uniform surfaces
- does not impair the adhesion of plaster, adhesives and painting work
- operating temperature up to 70 °C (shuttering temperature)
- solvent free
- contains very effective corrosion protection for steel shuttering
- SOK AQUA KS does not attack Styropor®
- good biodegradability