BITEEREX 1
Bitumen release agent for hot and melted asphalt
Description
BITEEREX 1 is a low viscous, hydrocarbon-based, ready-to-use release agent for bitumen.
Thanks to its good parting effect the product is suitable both for melted- as well as for hot asphalt.
Fields of application
Asphalt mixing plants, ashalt recycling plants, road finishing machines, lorry bodies and other equipment.
Method of application
BITEEREX 1 is applied thinly and uniformly with a brush or suitable spraying device (with Teejet nozzle SS 800067). Also suitable for spraying equipment.
Consumption ranges between 30 and 50 m²/l.
A test report (No. 2015/141-1) by Technische Universität Kaiserslautern/Materialprüfamt (Material Testing Institute of Technical University Kaiserslautern) is available.
BITEEREX 1 should not be diluted with water, oils or solvents – it is ready-to-use!
Note
- The duration of storage should not exceed 1 year.
- Store barrels horizontally.
- Re-seal container after use.
Please observe water resources policy act and EU safety data sheet!
Prior to its use on rubber-tire rollers, seals, etc., the compatibility with the elastomers should be verified.
The product may not come in contact with zinc or galvanised materials.
Features
- economical to use
- no release problems when transporting asphalt on truck loading platforms
- very good release effect, even with stone mastic asphalt
- Ready-to-use
- easily biodegradable