GLEITMO SFL 9070
Water-based PTFE solid film lubricant
Description
gleitmo SFL 9070 is a water-based and air-drying solid film lubricant with an organic binder. The lubricating effect is achieved by a combination of special fluoropolymers featuring high lubrication and non-stick properties along with an excellent “anti-squeaking” effect.
Fields of application
For dry coating of various material combinations especially of plastics, rubbers, and leather.
Allows smooth running, protects against wear, and prevents squeaking noise caused by stick slip of plastic combinations in a car’s interior.
gleitmo SFL 9070 is also suitable for the lubrication of screws/bolts, nuts, pins, sleeves and elastomer seals to obtain defined assembly results.
Method of application
gleitmo SFL 9070 can be processed using compressed air or airless spraying systems. In case of partial coatings gleitmo SFL 9070 can be applied using an absorbent material (e.g. sponge) or a brush.
Immersion or immersion centrifugation is appropriate for larger quantities of small parts. Sliding surfaces to be coated must be carefully degreased and dried prior to the application.
Note
Stir before use!
Protect from frost!
Shelf life: 12 months in closed original containers at ambient temperature.
Features
- forms a dry, thin lubricating film
- temperature range: -70 / +180 °C
- very good adhesion on a large number of material surfaces
- Excellent „anti-squeak“ properties
- offers good non-stick and separating properties
- neither dirty nor oily
- environmentally and user-friendly
- contains UV additive for UV coating inspection (340-380 nm)