SOK BTM HU 3
Concrete release agent for direct formwork removal, also for water/cement ratios > 0.41
Description
SOK BTM HU 3 is a chemicophysically reactive concrete parting agent with low viscosity.
Fields of application
SOK BTM HU 3 is a special product for direct formwork stripping (e.g. HUMARBO machinery, systems for the laying of joined floors and similar).
Method of application
A thin and uniform coat of SOK BTM HU 3 is applied with a brush or a suitable mineral-oil-resistant spraying device (with T jet nozzle SS 800067) to the clean and dry formwork. Consumption for nonabsorbent formwork 60 – 80 m²/l. The product should not come into contact with copper or zinc. This product is intended for concrete formulations containing Portland cement (CEM I). SOK BTM HU 3 may not be diluted with water, oils, or solvents – the delivered concentration is ready for use!
Note
- storage temperature not below -5 °C
- the storage period should not exceed 1 year
- store barrels on their sides
- reseal packaging after removal, e.g. to prevent the active substances from escaping at increased temperatures
Features
- prevents pore formation to a great extent
- ensures clean and even surfaces
- no impediment to plaster, adhesive, and paint adhesion
- temperature for use up to 90 °C (formwork temperature)